This POE Camera has built-in IEEE 802.3af POE module, With this module, ip camera can get power direct from POE switch, no need power adapter.

Features:

H.264 Main Profile @level 3
2.0 Megapixel 1920*1080 resolution
H.264 compression format, support dual steam
With IR-cut, P2P, Cloud preview
Support ONVIF, compatible with software Hikvision, Dahua etc.
With 2.8-12mm Megapixel varifocal lens
Waterproof, outdoor use
DWDR, 2DNR, AGC, BLC, AWB
With CMS
With POE module

Specification of POE Camera:

Model	DM-IPH516S-POE
Camera
Image Sensor	1/2.8" Sony MX 222 Progressive Scan CMOS
Effective Pixels	1920*1080
Scanning System	progressive
Min. Illuminationa	0lux (IR on)
S/N Ratio	more than 50dB
Camera Features
IR LEDs	36pcs Φ8 IR leds, IR distance: 50m
IR-CUT	yes
Lens	2.8-12mm megapixel varifocal lens
Backlight Compensation	BLC/HLC/DWDR
White Balance	auto / manual
Gain Control	auto / manual
Noise Reduction	2D
Privacy Mask	yes
Motion Detection	yes
Video & Audio
Compression Format	H.264
Resolution	1080P(1920×1080)/ 720P(1280×720)/D1(640×480) /CIF(320×240)
Frame Rate	Main stream: 1080P(1 ~ 25/30fps)
Frame Rate	Sub steam: D1/CIF(1 ~ 25/30fps)
Bit Rate	64Kb ~ 8192Kbps
Audio Input	no
Alarm Input	no
Network
Ethernet	RJ45
Video Protocol	TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, R TP,RTSP, ONVIF
Onvif	support
Camera Access	10 users visit at the same time
Mobile Surveillance	support Android, Iphone, Ipad
P2P	yes
Clould Preview	yes
CMS	yes
General
Power Supply	DC 12V 1A ( not included )
POE Module	yes
Operation Temperature	(-15°C~ 55°C )
Size	275130117mm
Housing	metal